product details dimension a dimension b dimension c dimension d interface material finish notes: dimension c = heat sink height from bottom of the base to the top of the fin fiel d. t hermal performance d ata are provided for referenc e only. ac tual performanc e may vary by applic ation. ats reserves the right to up d ate or change its produc ts without notice conta c t ats to learn about c ustom options available 1) 2) 3) 4) t hermal performance for more information, to fnd a distributor or to place an order, visit www.qats.com or call: 781.769.2800 (north america); +31 (0) 3569 84715 (europe). ats part # ats-1041-c2-r0 features & benefts maxifl o w? cross cut high performance heat sinks with metal push pin rev1_0908 air velocity thermal r esistance ( c/w unducted) ft/min m/s air flow straight air flow sid eways 200 1.0 300 1.5 400 2.0 500 2.5 600 3.0 3.9 3.3 2.8 6.2 2.5 41 mm 45 mm 10 mm 57 mm green anodized chomerics t -766 f or larger heat sinks and higher pre-loads, push pins with compression springs are an effective mounting choice. the push pin has a flexible barb at the end that is designed to engage with a pre-drilled hole in a pwb. the compression spring adds the necessary force to hold the assembly together. provides better thermal performance than comparable size straight fin and pin fin heat sinks features proven high performance maxiflow? heat sink spread fin array to maximize cooling surfaces ideal for tight spaced components where wider heat sinks cant be used provided with pre-assembled thermal interface material centered on base brass push pin with steel compression spring reccomended through hole size in pcb is 3.00 mm ? ? ? ? ? ? *image above is for illustration purposes only. 4.9 3.9 3.3 3 5
|
